installing pillar gauges sorted by
relevance

Admin16.07.2021

ZBUM's Autometer Gauge Installation Page

It is available with or without switches and can be had in a polished, brushed or black finish.
9709
Admin21.07.2021

ZBUM's Autometer Gauge Installation Page

Check out the sidebar for more information on these engines.
Admin07.09.2021

1999

Don't worry about getting the tilt of each one perfect as you will be able to adjust them once you rivet them on.
Admin10.07.2021

INSTALLING A TRIPLE GAUGE KIT IN A 1997

Keep boost line out of the way of anything that may come in contact with it and bend or crease it.
3403
Admin23.08.2021

ZBUM's Autometer Gauge Installation Page

Getting the pil lars back into position while pulling the wires and Boost tubing through their respective holes sort of requires three hands, but it's soon in place and securely affixed.
Admin31.07.2021

Autometer ES Gauges (How to Install C6 Corvette Gauges)

These two leads, one for the Fuel Rail pressure gauge L and a T-fitting equipped rubber hose are optional.
805
Admin10.07.2021

MaxTow

Locate the blue wire with a red stripe.
5602
Admin05.07.2021

ZBUM's Autometer Gauge Installation Page

By connecting to the dimmer, the gauge lights will dim with the rest of the dash lights.
6705
Admin14.06.2021

1999

You have to start somewhere, so we started with the EGT sender.
6206
Admin19.06.2021

Installing PPE Gauges and Triple Gauge Mount Pillar

Because that's where I'm used to seeing the voltmeter, and that's also where Nissan put the original boost gauge.
1904
Admin08.07.2021

INSTALLING A TRIPLE GAUGE KIT IN A 1997

For those interested operating oil temp seams to be about 190F and operating oil pressure seams to be about 40-50psi under load and 20psi while idling.
6903
Admin26.07.2021

MaxTow

I may be able to work around this with a time delay relay but haven't had a chance to look into that yet.
5103